PDF Download
All Zero Paints dry matt and require clearcoating unless otherwise specifiedApplication Notes :Zero Paints are pre-thinned for Airbrush use. Shake container until paint is thoroughly mixed. Spray at 15 - 40 psi,3 - 4 medium cross coats are recommended. Air drying at 20°C Dust-free: 5 – 10 mins, Tack-free: 20 - 30 mins. For additional thinning use Basecoat Thinners. Which Airbrush Cleaner should I use ?You can use either use Zero Paints Airbrush Cleaner or Basecoat Thinners, alternatively any thinners that contain Toluene should work, but it's best to test first. DO NOT use White Spirt or Acrylic Thinners, they are not suitable. |
 |
Health and Safety Notes :Harmful by inhalation. Irritating to eyes. Keep away from sources of ignition. NO SMOKING. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Wear suitable gloves. Use in a well ventilated area. Keep out of reach of children. Please download the Material Safety Datasheets here -> |
Williams FW14B Paint Set 3x30ml
These have been colour matched for the Tamiya 1:12 Williams FW14B
Supplied as the following :
- 1 off 30ml Bottle of Yellow Paint
- 1 off 30ml Bottle of Blue Paint
- 1 off 30ml Bottle of White Paint
Each 30ml of colour matched paint is This has been pre-thinned ready for Airbrushing.
For further information on using Zero Colour Matched Paints please read the Zero Paints F.A.Q. here
Model Built by Kevin Bridge
