Satin (Semi Gloss) Clearcoat Lacquer 30ml (Pre-Thinned for Airbrushing)
Satin (Semi Gloss) Clearcoat Lacquer 30ml (Pre-Thinned for Airbrushing)
Dries clear even over white
Instructions for use :
Leave the basecoat colour for 15/30 minutes before applying clearcoat, then apply 1 mist (tack) coat, after 5/10 mins you can apply further coats (we recommended a minimum of 2 single coats allowing 5-10 mins between each)
Air Drying Times at 20ºC,
Dust Dry : 30-40 mins
Touch Dry : 1 Hrs
Full Hardness : 24 Hours,
Thoroughly Dry : 48 Hours. Can be polished after 48 hours at 20ºC
Shelf Life : at least 2 years if stored in tightly closed original containers at cool temperatures.
Decals : So far we have found that the pre-thinned clearcoat is safe over all major brands of Decals like, Tamiya, Fujimi, Aoshima, Studio 27, Cartograf, Scale Motorsport etc. but please test on cheaper inkjet printed decals first
Always apply light mist coats over decals NEVER go straight on with wet coats, this could melt the decals
People who bought this, also purchased these:
