All Zero Paints dry matt and require clearcoating unless otherwise specified
Application Notes :Zero Paints are pre-thinned for Airbrush use. Shake container until paint is thoroughly mixed. Spray at 15 - 40 psi,
3 - 4 medium cross coats are recommended. Air drying at 20°C Dust-free: 5 – 10 mins, Tack-free: 20 - 30 mins.
For additional thinning use Basecoat Thinners.
Which Airbrush Cleaner should I use ?You can use either use Zero Paints Airbrush Cleaner or Basecoat Thinners, alternatively any thinners that contain Toluene should work, but it's best to test first. DO NOT use White Spirt or Acrylic Thinners, they are not suitable.
Health and Safety Notes :
Harmful by inhalation. Irritating to eyes. Keep away from sources of ignition. NO SMOKING. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Wear suitable gloves. Use in a well ventilated area. Keep out of reach of children. Please download the Material Safety Datasheets here ->
Kawasaki H2R Paint Set 4x30ml + Chrome Buffering Powder
4 off : 30ml bottles of paints for the Tamiya Kawasaki H2R Kit #14131 + Chrome Buffering Powder
This has been pre-thinned ready for Airbrushing and is
- 1 off : 30m bottle of Fine Maetallic Base Paint
- 1 off : 30ml bottle of Kawasaki Candy Green Paint (Different to other Zero Candy greens)
- 1 off : 30ml bottle of Gloss Black Paint
- 1 off : 30ml bottle of Pre-thinned Clearcoat
- 1 pot of Chrome Buffing Powder in Conjuction with C1 Models
- 2 Buffing Pads
- 1 Pair Gloves
- Application Guide/ Instructions
For further information on using Zero Colour Matched Paints please read the Zero Paints F.A.Q. here