All Zero Paints dry matt and require clearcoating unless otherwise specified
Application Notes :Zero Paints are pre-thinned for Airbrush use. Shake container until paint is thoroughly mixed. Spray at 15 - 40 psi,
3 - 4 medium cross coats are recommended. Air drying at 20°C Dust-free: 5 – 10 mins, Tack-free: 20 - 30 mins.
For additional thinning use Basecoat Thinners.
Which Airbrush Cleaner should I use ?You can use either use Zero Paints Airbrush Cleaner or Basecoat Thinners, alternatively any thinners that contain Toluene should work, but it's best to test first. DO NOT use White Spirt or Acrylic Thinners, they are not suitable.
Health and Safety Notes :
Harmful by inhalation. Irritating to eyes. Keep away from sources of ignition. NO SMOKING. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Wear suitable gloves. Use in a well ventilated area. Keep out of reach of children. Please download the Material Safety Datasheets here ->
Grey Model Filler / Putty (Fine) 180g
Model Filler (Fine) 180g (Yes 180g - 6 times bigger than most model fillers)
Which is a fine grade model filler which can be sanded, filed and painted once dry.
Fills hairline cracks and gaps between plastic parts.
The product can be sanded when fully dry using a fine grade of sandpaper and then painted.
Directly onto substrate without excessive application of product. If gaps are deep, two thin coats are preferable to one thick coat.
Surface dry in 15mins. Sandable in 20mins at 20 degree C. Drying times will vary according to ambient temperature and humidity.
Excess filler should be wiped away with a damp cloth. Product is permanent once dry.