All Zero Paints dry matt and require clearcoating unless otherwise specified
Application Notes :Zero Paints are pre-thinned for Airbrush use. Shake container until paint is thoroughly mixed. Spray at 15 - 40 psi,
3 - 4 medium cross coats are recommended. Air drying at 20°C Dust-free: 5 – 10 mins, Tack-free: 20 - 30 mins.
For additional thinning use Basecoat Thinners.
Which Airbrush Cleaner should I use ?You can use either use Zero Paints Airbrush Cleaner or Basecoat Thinners, alternatively any thinners that contain Toluene should work, but it's best to test first. DO NOT use White Spirt or Acrylic Thinners, they are not suitable.
Health and Safety Notes :
Harmful by inhalation. Irritating to eyes. Keep away from sources of ignition. NO SMOKING. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Wear suitable gloves. Use in a well ventilated area. Keep out of reach of children. Please download the Material Safety Datasheets here ->
Fisheye Eliminator - Anti-Silicone Additive - 30ml
1 off : 30ml /1 fl oz Bottle of Fisheye Eliminator / Anti-Silicone Additive for 2K Clearcoats urethanes to improve levelling and eliminate fisheyes and crater formation.
Produces perfect finish in extremely difficult application conditions.Improves levelling and eliminates silicone disruptions to paint surface.
For best results, mix 15ml per litre/ quart of lacquer or topcoat, add hardener and thinners where required, mix thoroughly and leave to condition for 10 minutes
Do not exceed recommended levels of addition. Do not use in primer systems
Common Causes of Fish eyes :
- Oil, wax, grease or silicone contamination.
- Polishes, aerosol spray that contain silicone (some interior cleaners).
- Contamination by overspray of an incompatible paint system
- Contaminated air lines.