All Zero Paints dry matt and require clearcoating unless otherwise specified
Application Notes :Zero Paints are pre-thinned for Airbrush use. Shake container until paint is thoroughly mixed. Spray at 15 - 40 psi,
3 - 4 medium cross coats are recommended. Air drying at 20°C Dust-free: 5 – 10 mins, Tack-free: 20 - 30 mins.
For additional thinning use Basecoat Thinners.
Which Airbrush Cleaner should I use ?You can use either use Zero Paints Airbrush Cleaner or Basecoat Thinners, alternatively any thinners that contain Toluene should work, but it's best to test first. DO NOT use White Spirt or Acrylic Thinners, they are not suitable.
Health and Safety Notes :
Harmful by inhalation. Irritating to eyes. Keep away from sources of ignition. NO SMOKING. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Wear suitable gloves. Use in a well ventilated area. Keep out of reach of children. Please download the Material Safety Datasheets here ->
Anti-Silicone Degreaser / Panel Wipe - 60ml
1 off : 60ml /2 fl oz Bottle of Anti-Silicone Degreaser / Panel Wipe
1 off : Lint free Cloth
This is carefully formulated to provide a powerful, aggressive degreasing
action that avoids any attack on existing paints, It is very important to remove contaminants such as wax, grease or silicones
Apply generously to the area to be coated using the clean, cloth supplied. While the panel remains wet, wipe with a clean dry cloth until the degreaser has been completely removed. This has been designed for use over bare metal and existing paint surfaces.