All Zero Paints dry matt and require clearcoating unless otherwise specifiedApplication Notes :Zero Paints are pre-thinned for Airbrush use. Shake container until paint is thoroughly mixed. Spray at 15 - 40 psi,3 - 4 medium cross coats are recommended. Air drying at 20°C Dust-free: 5 – 10 mins, Tack-free: 20 - 30 mins. For additional thinning use Basecoat Thinners. Which Airbrush Cleaner should I use ?You can use either use Zero Paints Airbrush Cleaner or Basecoat Thinners, alternatively any thinners that contain Toluene should work, but it's best to test first. DO NOT use White Spirt or Acrylic Thinners, they are not suitable. |
Health and Safety Notes :Harmful by inhalation. Irritating to eyes. Keep away from sources of ignition. NO SMOKING. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Wear suitable gloves. Use in a well ventilated area. Keep out of reach of children. Please download the Material Safety Datasheets here -> |
100ml Paint Remover/Stripper
100ml Paint Remover/Stripper
100ml Paint Stripper for Resin, Plastic & Metal.
This has been tested and work well on Zero Paints Basecoat Colours
PLEASE READ BEFORE USE :
- Wear gloves. Protect textiles and vinyl materials. Shake container well before use.
- Directions for use: transfer the required amount of paint stripper into a suitable container.
- Apply a generous coat onto the surface to be stripped with a suitable brush.
- Leave for approximately 15mins - 1 hour and apply a second coat if required.
- Once the stripper has penetrated into the Paint, Scrape off leaving the suface as clean as possible.
- Rub down stripped area using a scrubbing brush.Rinse with water and allow to dry.