All Zero Paints dry matt and require clearcoating unless otherwise specifiedApplication Notes :Zero Paints are pre-thinned for Airbrush use. Shake container until paint is thoroughly mixed. Spray at 15 - 40 psi,3 - 4 medium cross coats are recommended. Air drying at 20°C Dust-free: 5 – 10 mins, Tack-free: 20 - 30 mins. For additional thinning use Basecoat Thinners. Which Airbrush Cleaner should I use ?You can use either use Zero Paints Airbrush Cleaner or Basecoat Thinners, alternatively any thinners that contain Toluene should work, but it's best to test first. DO NOT use White Spirt or Acrylic Thinners, they are not suitable. |
 |
Health and Safety Notes :Harmful by inhalation. Irritating to eyes. Keep away from sources of ignition. NO SMOKING. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Wear suitable gloves. Use in a well ventilated area. Keep out of reach of children. Please download the Material Safety Datasheets here -> |
120 off Stainless Steel Paint Mixing Ball Bearings for 30ml
120 off Stainless Steel Paint Mixing Ball Bearings for 30ml
Being Stainless Steel Grade 520 they are suitable for all paints Enamels, Acrylic etc and will not rust or contaminate your paints, These are what we use in all Zero Paints products.
For use with ZeroPaints 30ml glass jars.
X2 ball bearings per 30ml jar recommended
People who bought this, also purchased these:
