All Zero Paints dry matt and require clearcoating unless otherwise specifiedApplication Notes :Zero Paints are pre-thinned for Airbrush use. Shake container until paint is thoroughly mixed. Spray at 15 - 40 psi,3 - 4 medium cross coats are recommended. Air drying at 20°C Dust-free: 5 – 10 mins, Tack-free: 20 - 30 mins. For additional thinning use Basecoat Thinners. Which Airbrush Cleaner should I use ?You can use either use Zero Paints Airbrush Cleaner or Basecoat Thinners, alternatively any thinners that contain Toluene should work, but it's best to test first. DO NOT use White Spirt or Acrylic Thinners, they are not suitable. |
 |
Health and Safety Notes :Harmful by inhalation. Irritating to eyes. Keep away from sources of ignition. NO SMOKING. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Wear suitable gloves. Use in a well ventilated area. Keep out of reach of children. Please download the Material Safety Datasheets here -> |
Pre-Thinned Paint Sealer - 60ml
The ZERO SEALER is a quick drying yellow oxide isolator/sealer. The SEALER is supplied ready for use, therefore no thinners are required. Use Zero Paints Airbrush Cleaner equipment after use for cleaning.
This helps with colour bleed. e.g. Painting Red plastic with White or light colours, which have been known to bleed though the primer. Applying a coat of sealer acts as a colour block, before the primer.
Usage Notes:
Thoroughly clean and de-wax the old paint surface with a spirit wipe or suitable cleaner.
Shake/Stir well before use. Apply only one light, even coat is required, checking first that the air line is free of moisture as usual.
One light even coat of sealer will give a layer of approximately 10-20 microns. A airbrush pressure of 30 psi is required.
It will be totally dry after approximately 1 hour at normal temperatures. Drying time is dependent on paint thickness, humidity and temperature.
The sealer should be overcoated with primer
