All Zero Paints dry matt and require clearcoating unless otherwise specified
Application Notes :Zero Paints are pre-thinned for Airbrush use. Shake container until paint is thoroughly mixed. Spray at 15 - 40 psi,
3 - 4 medium cross coats are recommended. Air drying at 20°C Dust-free: 5 – 10 mins, Tack-free: 20 - 30 mins.
For additional thinning use Basecoat Thinners.
Which Airbrush Cleaner should I use ?You can use either use Zero Paints Airbrush Cleaner or Basecoat Thinners, alternatively any thinners that contain Toluene should work, but it's best to test first. DO NOT use White Spirt or Acrylic Thinners, they are not suitable.
Health and Safety Notes :
Harmful by inhalation. Irritating to eyes. Keep away from sources of ignition. NO SMOKING. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Wear suitable gloves. Use in a well ventilated area. Keep out of reach of children. Please download the Material Safety Datasheets here ->
MATT/ FLAT 2 Pack Clearcoat 100ml (2K Urethane)
Matt / Flat 2 Pack Clear Coat for use on various models requiring a matt protective finish.
- 100ml Matt Clear Coat (Medium Solid) also known as Urethane or Polyurethane ()
- 25ml Hardener ()
- 60ml Thinners ()
Mixing Ratio : 100 Parts Clear + 25 Parts Hardener + 30 Parts Thinner.
(e.g. 50ml Clear, 12.5ml Clear + 15ml Thinners)
This text is stolen from www.hiroboy.com
Drying Times : Air Drying at 20oC, Dust Free 30 Mins, Tack Free : 10-12 Hours, Thoroughly Dry : 24 Hours.
This Clear coat is safe over all major brands of Decals
Tamiya, Fujimi, Aoshima, Studio 27, Cartograf, Scale Motorsport etc.
Please remember to apply a few mist coats over the decals before the wet coats