All Zero Paints dry matt and require clearcoating unless otherwise specifiedApplication Notes :Zero Paints are pre-thinned for Airbrush use. Shake container until paint is thoroughly mixed. Spray at 15 - 40 psi,3 - 4 medium cross coats are recommended. Air drying at 20°C Dust-free: 5 – 10 mins, Tack-free: 20 - 30 mins. For additional thinning use Basecoat Thinners. Which Airbrush Cleaner should I use ?You can use either use Zero Paints Airbrush Cleaner or Basecoat Thinners, alternatively any thinners that contain Toluene should work, but it's best to test first. DO NOT use White Spirt or Acrylic Thinners, they are not suitable. |
 |
Health and Safety Notes :Harmful by inhalation. Irritating to eyes. Keep away from sources of ignition. NO SMOKING. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Wear suitable gloves. Use in a well ventilated area. Keep out of reach of children. Please download the Material Safety Datasheets here -> |
Crystal Clear - Adhesive for Clear Parts 50ml
Crystal Clear - Adhesive for Clear Parts 50ml
*Dries clear *Fast Drying *Flexible * Fog Free
For gluing clear parts in place. Perfect for Windscreens, Canopies, Lights, Indicators, and other small parts e.g. Mirrors, Number Plates etc.
Apply a small bead to one surface and tape in position till dry. Drying time is 3 hours and fully cured in 24 hours. Clean up with tap water
Caution : May cause mild skin irritant. Avoid contact with eyes, for eye contact wash with water for 15mins and seek medical attention.
People who bought this, also purchased these:
