All Zero Paints dry matt and require clearcoating unless otherwise specifiedApplication Notes :Zero Paints are pre-thinned for Airbrush use. Shake container until paint is thoroughly mixed. Spray at 15 - 40 psi,3 - 4 medium cross coats are recommended. Air drying at 20°C Dust-free: 5 – 10 mins, Tack-free: 20 - 30 mins. For additional thinning use Basecoat Thinners. Which Airbrush Cleaner should I use ?You can use either use Zero Paints Airbrush Cleaner or Basecoat Thinners, alternatively any thinners that contain Toluene should work, but it's best to test first. DO NOT use White Spirt or Acrylic Thinners, they are not suitable. |
 |
Health and Safety Notes :Harmful by inhalation. Irritating to eyes. Keep away from sources of ignition. NO SMOKING. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Wear suitable gloves. Use in a well ventilated area. Keep out of reach of children. Please download the Material Safety Datasheets here -> |
Blu Tack
Blu Tack
Permanently plastic and pliable, Reusable
1000's of uses great for holding parts while airbrushing, painting etc, Use as masking material
We couldn't build models without it, so that why we now stock it.
It simple to use : Make a blob by tearing off a piece, pull and stretch into a ball and apply to one surface.
Need to know more about this product visit http://en.wikipedia.org/wiki/Blu-Tack
Please Note : Packaging designs and colour can vary
People who bought this, also purchased these:
